Motor Shield

Requests for new features and products, news about what we are working on.
Post Reply
W4CWZ
Posts: 2
Joined: Mon Sep 14, 2009 4:20 pm

Motor Shield

Post by W4CWZ » Tue Sep 15, 2009 11:02 pm

Asked this in the hardware forum but it probably belongs here. Is there a motor shield in the works for the BBB? I have a shield from NKC Electronics which will not work due to physical size and connector placement. Failing that, any suggestions short of building a custom cable to join the two? Saw the post about an adapter board, is that a possibility?

paul
Site Admin
Posts: 734
Joined: Mon May 12, 2008 4:19 pm

Re: Motor Shield

Post by paul » Wed Sep 16, 2009 8:38 am

I answered some of this question on the "hardware" forum.
No plans right now for a motor shield - but you never know.

I'm more inclined to do Atmega + x functionality so people don't end up buying an expensive Arduino & expensive H-bridge board, or whatever.

Paul

Michaelkfyif
Posts: 9
Joined: Tue Sep 19, 2017 5:02 pm

Motor Shield

Post by Michaelkfyif » Sat Sep 23, 2017 11:26 am

I have a NXT motor hooked up to my arduino and motor shield, and can feel it vibrating as though it has power. Yet when I try to run the code I have it does nothing.

Dudemhccv
Posts: 9
Joined: Wed Sep 20, 2017 12:42 am

Motor Shield

Post by Dudemhccv » Sun Sep 24, 2017 4:16 am

Thatd really strengthen shield/block play, which is already almost a every character should have and use a shield.

Michaelchase
Posts: 7
Joined: Tue Sep 19, 2017 4:04 am

Motor Shield

Post by Michaelchase » Sun Oct 01, 2017 5:14 am

Youll likely have to change PWM_PIN and writeMotors. Do you know what Arduino board type it is?

Post Reply