Interfacing a Serial LCD Kit with a Computer via COM port?

Interfacing hardware, sensors, output drivers, chips.
vapour
Posts: 2
Joined: Thu Jul 23, 2009 3:19 pm

Interfacing a Serial LCD Kit with a Computer via COM port?

Post by vapour »

Hello;

I am working on an LCD system to give a little more personality to my team's robotic Blackjack player/dealer (http://hackaday.com/2009/04/09/jak-the-blackjack-robot/). After browsing the web for a solution, I discovered this website and its great prices! However I am having trouble finding documentation regarding connecting a serial LCD to a COM port of my computer. If I bought the "16 x 2 blue character LCD's with LCD117 board kit" would I be able to connect that output to my COM port (USB isn't an option)? I do own an Arduino, but I aim to take up as little space in the cramped enclosure as possible.

Regards; Paul

oz
Site Admin
Posts: 542
Joined: Mon May 12, 2008 4:19 pm

Re: Interfacing a Serial LCD Kit with a Computer via COM port?

Post by oz »

vapour,

COM ports have inverted serial, my board can't handle that. You can find boards that that will work which use the same chip but are slightly different in layout at wulfden.org .

Paul

vapour
Posts: 2
Joined: Thu Jul 23, 2009 3:19 pm

Re: Interfacing a Serial LCD Kit with a Computer via COM port?

Post by vapour »

I didnt notice until now that the solution we are using) has an I²C port integrated, hidden amongst a myriad of other I/O ports.

thanks for your quick reply though.

Regards; Paul

(thats right, I'm a Paul too! ;) )

Post Reply