Pressure Sensor

Questions about Modern Device and JeeLabs Sensors
Don
Posts: 2
Joined: Thu Oct 09, 2014 11:48 am

Pressure Sensor

Post by Don »

Hi,

What connections must be made to the MPXV differential pressure sensors (Analog Output)? Which pins (if any) can (must?) be left unconnected?

Thanks, Don

oz
Site Admin
Posts: 542
Joined: Mon May 12, 2008 4:19 pm

Re: Pressure Sensor

Post by oz »

Don,

You've probably figured this out long ago. (Sorry about the really slow reply)
There are only three lines on the pressure sensor GND +V (5V) and the Vout line. The other pins are more for mechanical stability and all the pins are in parallel. If you use a meter on continuity you can confirm that.

Hope that helps,

Paul

Don
Posts: 2
Joined: Thu Oct 09, 2014 11:48 am

Re: Pressure Sensor

Post by Don »

Yes it does, thanks. The pins are labelled clearly enough. I was just being cautious with the extra pins--didn't want to ruin my sensor. However I did go ahead and try it and it works fine.

Don

Post Reply