AVcc

Interfacing hardware, sensors, output drivers, chips.
User avatar
droops
Posts: 7
Joined: Tue Aug 05, 2008 10:34 am
Contact:

AVcc

Post by droops »

So I read the documentation and it says that AVcc is for the Analog to Digital Converter. Can someone explain what exactly this does?

oz
Site Admin
Posts: 542
Joined: Mon May 12, 2008 4:19 pm

Re: AVcc

Post by oz »

The AVcc pin provides a reference voltage for the A/D converters. The Atmega 168 datasheet is the best place for detailed reference. Their ref design suggests a small inductor to keep high frequency noise off that pin.

You might also be interested in the AREF pin (marked "AR" on the BBB) and AREF (in really tiny letters on RBBB).

Check the docs at http://arduino.cc/en/Reference/AnalogReference

I wrote them so write back if you find anything confusing or with which you disagree.

Paul

Post Reply