Hi,
The ADD8704 is not available on Mouser anymore. Could you please provide some replacement parts?
Thanks,
Quax
Wind Sensor alternative OPAMP
Re: Wind Sensor alternative OPAMP
I didn't use that op - amp anyway - sorry about the schematic.
I just grabbed the first quad SOIC op amp I found and plunked it down. (hence the note)
Any general purpose rail to rail type will work. We're using TLV2434AIPWR chiefly because it can handle higher voltages - I think I was originally looking for 12 volts in case someone wanted to use the sensor on a car. TLC6484 is one that's available in DIP I believe.
Paul
I just grabbed the first quad SOIC op amp I found and plunked it down. (hence the note)
Any general purpose rail to rail type will work. We're using TLV2434AIPWR chiefly because it can handle higher voltages - I think I was originally looking for 12 volts in case someone wanted to use the sensor on a car. TLC6484 is one that's available in DIP I believe.
Paul
Re: Wind Sensor alternative OPAMP
Hi Paul,
Thank you for this information. Trying to get the TLV2434AIPWR is also hard on mouser.com What about a MCP6004?
Regards
Thank you for this information. Trying to get the TLV2434AIPWR is also hard on mouser.com What about a MCP6004?
Regards
Re: Wind Sensor alternative OPAMP
Should work fine - but 6 volts only I think
Paul
Paul