Hi all,
I am trying to temperature compensate the wind sensor that is sold here: http://shop.moderndevice.com/products/wind-sensor. I will be heavily modifying the circuit, and I was wondering what the two thermistors were that the wind sensor uses. I found out in another thread (http://forum.moderndevice.com/viewtopic.php?f=22&t=778) that the self-heating thermistor is a murata 470 Ohm thermistor in a 402 package. The schematic says that the ambient temperature thermistor has a nominal value of 10Kohms. Is this thermistor also a murata thermistor? Also, what package is it?
Thanks for any and all help!
Wind Sensor Temperature Compensation
Re: Wind Sensor Temperature Compensation
madvoid
We've used some different sensors over the years. These are current production
R4 Thermistors - NTC 470 OHM NCP15XQ471E03RC
temp sensor THERMISTOR NTC 10K OHM 1% 0603 ERT-J1VG103FA
As to the temp sensor - I'd try to get away from the simple voltage divider we have in place. The world is full of temp sensors
I found some good low-cost thermistor based temp sensors (after the last rev was in place) that were going to be my choice for the next version of the
wind sensor.
Let me know how you make out with the mods.
Paul
We've used some different sensors over the years. These are current production
R4 Thermistors - NTC 470 OHM NCP15XQ471E03RC
temp sensor THERMISTOR NTC 10K OHM 1% 0603 ERT-J1VG103FA
As to the temp sensor - I'd try to get away from the simple voltage divider we have in place. The world is full of temp sensors
I found some good low-cost thermistor based temp sensors (after the last rev was in place) that were going to be my choice for the next version of the
wind sensor.
Let me know how you make out with the mods.
Paul
Re: Wind Sensor Temperature Compensation
Hi Paul,
Thank you very much for your help! I'll keep your advice about trying to get away from the thermistor for the modifications. One of the biggest things is the nonlinearity of thermistors, which makes everything more difficult. Have you tried playing with temperature compensation? Do you have any tips? I will definitely keep you updated with any progress I make.
madvoid
Thank you very much for your help! I'll keep your advice about trying to get away from the thermistor for the modifications. One of the biggest things is the nonlinearity of thermistors, which makes everything more difficult. Have you tried playing with temperature compensation? Do you have any tips? I will definitely keep you updated with any progress I make.
madvoid