Which pins are not used?
Posted: Mon Dec 12, 2011 10:00 pm
Greetings,
The silkscreen on the board says "PINS IN USE" beneath pins 13, 12, 11, and 10, and there is a box around 9 that seems to include that pin.
Looking in the schematic, however, it seems that 9 is not used, and 7 is used. (10-13 appear to be used and correctly marked on the PCB.)
Which pins should be considered in use and off-limits to development?
The silkscreen on the board says "PINS IN USE" beneath pins 13, 12, 11, and 10, and there is a box around 9 that seems to include that pin.
Looking in the schematic, however, it seems that 9 is not used, and 7 is used. (10-13 appear to be used and correctly marked on the PCB.)
Which pins should be considered in use and off-limits to development?