Fluxamasynth V3 library needed updating
Posted: Wed Mar 28, 2018 1:09 pm
Paul,
I used Arduino 1.8.5 with the Fluxamasynth shield REV 3.0 and it complained about redefining all the program names that
exist in ProgramChange.h.
I simply added a number like ChurchOrgan1 to avoid many of the warning messages.
This will conflict with the SAM2695.pdf that designates the names as identical.
I passed this on to Shawn for dissemination to community and customers if necessary.
My own objective is more of the same I did with past devices.
I will be trying to come up with a valid Rosegarden device to include my names.
From the Rosegarden introduction:
I am also looking for the use of NewSoftSerial.cpp as it has been superceeded to SoftwareSerial after V1.0
URL is
Is there a newer version library with documentation due out since the update schematic 12/3/15 2:08 pm ?
The link on the schematic page is also 404 not found along with any wiki mentioned in the past.
This device is exactly what I was looking for to update my MIDI skills but I need to learn to do programming
for current IDE Arduino 1.8.5 as well as MIDI to get it to work.
I am willing to start discussion here to share current (2018) work on and with the Fluxamasync.
I used Arduino 1.8.5 with the Fluxamasynth shield REV 3.0 and it complained about redefining all the program names that
exist in ProgramChange.h.
I simply added a number like ChurchOrgan1 to avoid many of the warning messages.
This will conflict with the SAM2695.pdf that designates the names as identical.
I passed this on to Shawn for dissemination to community and customers if necessary.
My own objective is more of the same I did with past devices.
I will be trying to come up with a valid Rosegarden device to include my names.
From the Rosegarden introduction:
Code: Select all
"A “device”, as far as Rosegarden is concerned, is simply something capable of producing sounds."
https:// www .rosegardenmusic .com/resources/documents/rgd-HOWTO.shtml
URL is
Code: Select all
https:// www .pjrc .com/teensy td_libs_SoftwareSerial. htmlThe link on the schematic page is also 404 not found along with any wiki mentioned in the past.
This device is exactly what I was looking for to update my MIDI skills but I need to learn to do programming
for current IDE Arduino 1.8.5 as well as MIDI to get it to work.
I am willing to start discussion here to share current (2018) work on and with the Fluxamasync.