Neon art moved by RBBB

Post your projects. Pictures, code, and bragging welcome.
Posts: 1
Joined: Sun Nov 29, 2009 8:27 pm

Neon art moved by RBBB

Post by cclark »

I am taking a neon glass blowing class at The Crucible in Oakland, CA and used an RBBB and a servo for this project: ... directlink

I was happy it survived me plugging the ATmega in backwards for about 2 seconds of power. I used a 7805 on the board since
a servo takes a fair bit of power from the 5V supply. Programming the RBBB was using a Adafruit USBtinyISP programmer
through a small breakout board to the RBBB on a breadboard.

My last class art project will use a special Neon power supply that can control the brightness with an RBBB, I will post if it
works out.