Byteseeker 2.1 issues
Posted: Sat Mar 07, 2015 10:28 am
I just got the V2.1 Byteseeker kit and had some issues:
1) the installation instructions (http://moderndevice.com/wp-content/uplo ... ctions.pdf) and the schematic (http://moderndevice.com/wp-content/uplo ... erMini.png) aren't for the V2.1 board
2) I decided to build the board according to the image at http://moderndevice.com/product/byteseeker-junior-2-1/.
3) It still didn't work. However, by connecting D11 (the PWM output) to the wiper of the volume pot, I was getting the expected output. Strange....
In any event, once I got through these issues, the board works great!
I have one question: What are the dip switches on the V2.1 board to be used for?
1) the installation instructions (http://moderndevice.com/wp-content/uplo ... ctions.pdf) and the schematic (http://moderndevice.com/wp-content/uplo ... erMini.png) aren't for the V2.1 board
2) I decided to build the board according to the image at http://moderndevice.com/product/byteseeker-junior-2-1/.
3) It still didn't work. However, by connecting D11 (the PWM output) to the wiper of the volume pot, I was getting the expected output. Strange....
In any event, once I got through these issues, the board works great!
I have one question: What are the dip switches on the V2.1 board to be used for?