Connecting the LM4889 audio amplifier toa SparkFun MP3 shiel
Posted: Mon Oct 20, 2014 1:58 pm
I'd like to use the LM4889 amp I just bought to allow a speaker to be connected to my SparkFun MP3 shield. The MP3 shield has - L and R contacts, so my thought is to connect (listing shield first then amp) one of L or R to AIN and - to G. However, there's a failry sizable warning on the tutorial page about Line out connections (you have to scroll down a bit to get to the correct part of this section) and the danger of a ground loop (and there's an associated datasheet for the VS10XX chip describing all this in more detail than I can follow). In this case this shouldn't be a problem, but is it safe to attach the - (aka GBUF) to the G pin on the LM4889, or does the ground line on the amp need to be "real" ground, rather than the 1.25V biased "Ground" that is GBUF (-)?
Thanks for any help,
Doug
Thanks for any help,
Doug