Page 1 of 1

SHT 21 Sensor with Raspberry Pi

Posted: Sat Jun 28, 2014 1:21 pm
by steppermotor
I recently bought the SHT21 assembled board from Modern Device. I am trying to use with my Raspberry pi. I tried using this code from this repository to get my pi running.

https://github.com/jaques/sht21_python

But I get an input/output error, anyone had success using this with a PI not much documentation or libraries.

I am driving the Vin with 5 V, GND to GND, and I2C ports to their appropriate connection on the PI Board. I have a BMP180 sensor and it works fine. ]

Any thoughts?

Re: SHT 21 Sensor with Raspberry Pi

Posted: Sun Jul 13, 2014 6:01 pm
by oz
hopefully you'll get an answer from another user.
I don't have any depth in python/pi troubleshooting.

Paul