Current sensor @ low current (11w)
Posted: Sat Mar 15, 2014 2:42 pm
Just a note that I am working on an application to detect if a device is on or off. The device draws about 11 watts at 120 vac per specifications. I am having a difficult time detecting current draw as expected. I noticed if I locate the power cord where each conductor was over each sensor (power cord at about 45 deg with respect to recommended position) I am able to observed a dc voltage diff when powered. On= ~ 0.070v ; off= 0.30v
Next step is to determine how to semi permanently secure my power cord to the sensor board at that position. Final step will be to interface sensor to a comparator then led indicator.
Next step is to determine how to semi permanently secure my power cord to the sensor board at that position. Final step will be to interface sensor to a comparator then led indicator.