Use LoP-Parameters with PureData

Making your program work.
Post Reply
Posts: 1
Joined: Tue Aug 27, 2013 4:42 am

Use LoP-Parameters with PureData

Post by RoyBear » Fri Sep 06, 2013 8:16 am

Hi Guys & Gals,

I got me a Lots of Pots, soldered the Pins and Pots, strapped some other Buttons and Encoder and a Friend set me an Environment, i could work with.
He used Arch Linux, installed a GUI, phyton2 and PureData with all the stuff you need to work with (including ALSA and Jack).
Then he wrote down the Pyhton code and showed me how it works. Fine.

But thats all i know 'bout that stuff :(

could someone tell me how i could "tunnel" the Parameters of that codesample to PureData, so i could use them as classic midi-data?

i don't even know if this Forum is the right place, but i thought that it should be a good start :)


Site Admin
Posts: 735
Joined: Mon May 12, 2008 4:19 pm

Re: Use LoP-Parameters with PureData

Post by paul » Sat Oct 05, 2013 12:13 pm


Shawn is working on an example and tutorial for a blog post. Coming up on the blog front page.

Posts: 1
Joined: Tue Feb 06, 2018 11:14 pm

Re: Use LoP-Parameters with PureData

Post by haigarmen » Wed Feb 07, 2018 2:09 pm

Has anyone been able to get LoP working with Raspberry Pi 3 with Raspbian 9 (Stretch)? When I run the test script I don't get any errors but 0's for all the 8 potentiometer readings. Any help would be appreciated.

Post Reply