I am taking a neon glass blowing class at The Crucible in Oakland, CA and used an RBBB and a servo for this project:
http://picasaweb.google.com/lh/photo/DZ ... directlink
I was happy it survived me plugging the ATmega in backwards for about 2 seconds of power. I used a 7805 on the board since
a servo takes a fair bit of power from the 5V supply. Programming the RBBB was using a Adafruit USBtinyISP programmer
through a small breakout board to the RBBB on a breadboard.
My last class art project will use a special Neon power supply that can control the brightness with an RBBB, I will post if it
works out.
Enjoy,
Chris