Discussion of Jee Products and Wireless Tech
Posts: 1
Joined: Mon Apr 30, 2012 6:14 am


Post by blkno1 »

Just got my LCD plug all put together. I was wondering what the proper setup for the plug is with the LCD bough from Modern Device? I tried with the logic and power switches both at 3.3v and all I get is just a lit back light (running the lcddemo), no read out. And how the devil do you adjust the trimpot on that thing? :oops:

Posts: 1
Joined: Tue Jan 08, 2013 5:32 pm

Re: LCD-Plug

Post by ciscomonkey »

Check here for the three that you have to jumper. He said he had to crank his pot all the way up, but I didn't on mine.

Site Admin
Posts: 542
Joined: Mon May 12, 2008 4:19 pm

Re: LCD-Plug

Post by oz »

Trimpot is adjusted to see letters clearly, but not the rectangles behind the letters. Usually it's way at the end of the dial. I'm sorry to say I can't remember whether it's clockwise or CCW.


Post Reply