Power consumption

Questions about the Really Bare Bones Board
Post Reply
omoril
Posts: 1
Joined: Thu Nov 13, 2014 10:21 pm

Power consumption

Post by omoril » Thu Nov 13, 2014 10:37 pm

Hi,
My board is working just fine but while trying to use some techniques to reduce power consumption described elsewhere I'm still getting somewhat high values. One test I did was to measure the current without the CPU connected (led is out too). My meter is showing about 0.60mA! !?? Is it my meter that is a bit off? I'm using the 3.3V board, if that matters.

PS. I'm CS not EE so pardon the "typos".

Post Reply