Wind Sensor alternative OPAMP

Questions about Modern Device and JeeLabs Sensors
Post Reply
quax
Posts: 3
Joined: Thu Aug 22, 2013 1:10 am

Wind Sensor alternative OPAMP

Post by quax » Thu Aug 22, 2013 1:18 am

Hi,

The ADD8704 is not available on Mouser anymore. Could you please provide some replacement parts?

Thanks,
Quax

paul
Site Admin
Posts: 734
Joined: Mon May 12, 2008 4:19 pm

Re: Wind Sensor alternative OPAMP

Post by paul » Thu Aug 22, 2013 10:18 am

I didn't use that op - amp anyway - sorry about the schematic.
I just grabbed the first quad SOIC op amp I found and plunked it down. (hence the note)
Any general purpose rail to rail type will work. We're using TLV2434AIPWR chiefly because it can handle higher voltages - I think I was originally looking for 12 volts in case someone wanted to use the sensor on a car. TLC6484 is one that's available in DIP I believe.

Paul

quax
Posts: 3
Joined: Thu Aug 22, 2013 1:10 am

Re: Wind Sensor alternative OPAMP

Post by quax » Thu Aug 22, 2013 10:49 am

Hi Paul,

Thank you for this information. Trying to get the TLV2434AIPWR is also hard on mouser.com What about a MCP6004?

Regards

paul
Site Admin
Posts: 734
Joined: Mon May 12, 2008 4:19 pm

Re: Wind Sensor alternative OPAMP

Post by paul » Thu Aug 22, 2013 3:00 pm

Should work fine - but 6 volts only I think

Paul

Post Reply