3x7 0.1" (2.54mm) Header MANUFACTURING

Questions and Discussion concerning the Bare Bones Board
Post Reply
orengo
Posts: 1
Joined: Fri Jun 29, 2012 10:04 pm

3x7 0.1" (2.54mm) Header MANUFACTURING

Post by orengo » Fri Jun 29, 2012 10:09 pm

What is the manufacturer of 3x7 0.1 "(2.54mm) Male and Female Header?

Best Regards,

JORGE ORENGO
Top
paul
Site Admin
Posts: 733
Joined: Mon May 12, 2008 4:19 pm

Re: 3x7 0.1" (2.54mm) Header MANUFACTURING

Post by paul » Sat Jun 30, 2012 6:21 pm

orengo,

4Uconn - 4uconnector.com

Send email to sales @ moderndevice.com and they can provide a part number.

I'm in Maine, trying not to think too much about electronics.


Paul
Top
Post Reply

Return to “BBB”