I want to share with you, this code to test your fluxamasynth shield with the Cubloc 220 Of Comfile technologies...
This code works thery well...
best regards,
Lestroso
http://www.fasasoftware.com
Code: Select all
Const Device = CB220
Opencom 1,31250,3,30,20
Putstr 1,240,127,127,4,1,0,127,247 'set the master volume, you can change from 0 to 127 modifing the last 127 number value
Putstr 1,192,1 ' program change, we set the instrument from 0 to 127 that we want ,we change the last value..!!
Putstr 1,144,60,64 ' play notes on
Delay 1000 ' we put a pause
Putstr 1,128,60,64 ' turn off notes