Search found 3 matches

by TimW
Sat Jul 02, 2011 8:22 pm
Forum: Connecting to BBB, RBBB
Topic: BBB Uploading Problem
Replies: 6
Views: 10064

Re: BBB Uploading Problem

Paul, I've been out of town, but I've had a chance to look at what you've suggested. I've got the red BUB, but I already had the shunt installed, and set to 5 V. I tried it set to 3.3 V, but no change. I've checked all of the connections between the header and the board. They all seem good. Maybe it...
by TimW
Tue Jun 14, 2011 11:20 pm
Forum: Connecting to BBB, RBBB
Topic: BBB Uploading Problem
Replies: 6
Views: 10064

Re: BBB Uploading Problem

Paul, Thanks for your suggestions. I reheated the pins.. No difference. I switched the chips between my good board and the bad. I was able to upload to the chip. When I put that chip back in the bad board, the sketch worked as expected. I put in a println statement as well, and the bad board is able...
by TimW
Tue Jun 14, 2011 11:56 am
Forum: Connecting to BBB, RBBB
Topic: BBB Uploading Problem
Replies: 6
Views: 10064

BBB Uploading Problem

Hi, When I try to upload a sketch to my BBB with a BUB, I am having the infamous upload error: avrdude: stk500_getsync(): not in sync: resp=0x00 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51 I've gone through all the posts I've found on the forum on this issue, and tried the trou...