Thanks Don,
For you help again, through your assistance I figured out what I needed to know.
The TMP421 temperature sensor board by ModernDevices has a 10kohm pullup resistor going to
data (pin 6) and a 10kohm pullup resistor going to the clk (pins7) of the sensor chip. There also
is a capacitor ...
Search found 4 matches
- Sun Feb 20, 2011 10:59 am
- Forum: Hardware
- Topic: TMP421 temperature sensor
- Replies: 5
- Views: 22322
- Sat Feb 19, 2011 1:52 pm
- Forum: Hardware
- Topic: TMP421 temperature sensor
- Replies: 5
- Views: 22322
Re: TMP421 temperature sensor
Does anyone have a schematic diagram of the moderndevice TMP421 temperature sensor board.
I can't figure out where pin 1 is located on the sensor chip of the board, there usually is a dot
located on one of the corners of the chip, indicating pin 1. The chip on the pc board does not show
the dot ...
I can't figure out where pin 1 is located on the sensor chip of the board, there usually is a dot
located on one of the corners of the chip, indicating pin 1. The chip on the pc board does not show
the dot ...
- Fri Feb 18, 2011 2:14 pm
- Forum: Hardware
- Topic: TMP421 temperature sensor
- Replies: 5
- Views: 22322
Re: TMP421 temperature sensor
Thanks Don, for your quick reply.
When I looked at the picture in the past I did not notice the
header was visible. I'll solder the header as shown in the picture.
Again thanks for your help.
abeza
When I looked at the picture in the past I did not notice the
header was visible. I'll solder the header as shown in the picture.
Again thanks for your help.
abeza
- Fri Feb 18, 2011 12:46 pm
- Forum: Hardware
- Topic: TMP421 temperature sensor
- Replies: 5
- Views: 22322
TMP421 temperature sensor
I just purchased a TMP421 temperature sensor and would like to
connect it to my picaxe 12M2 processor. The sensor came with a 4 pin header,
there are 8 pins associated with the sensor and I have no idea of what sensor pins
to use with the 4 pin header and what they represent in terms of DXP, DXN, A ...
connect it to my picaxe 12M2 processor. The sensor came with a 4 pin header,
there are 8 pins associated with the sensor and I have no idea of what sensor pins
to use with the 4 pin header and what they represent in terms of DXP, DXN, A ...