Modern Device Forum

I just got the V2.1 Byteseeker kit and had some issues: 1) the installation instructions (http://moderndevice.com/wp-content/uploads/2013/08/ByteseekerInstructions.pdf) and the schematic (http://moderndevice.com/wp-content/uploads/2013/08/ByteseekerMini.png) aren't for the V2.1 board 2) I decided to...

If you build the CapSense Shield according to the instructions, and put the audio output jack on the bottom, you will find that the jack will hit the Arduino Diecimila power jumper and thus not allow the CapSense Shield to mount flush. I also found that the resistor packs in the kit weren't the same...

I see that that there is no documentation specifically for the Fluxamasynth Shield yet. When can we expect it? I found out that one has to power the Arduino via the power jack for the Fluxamasynth Shield to operate (just as does the Fluxamasynth board). It's nice to see that there is a red status LE...

Yeah, those 5 pin Midi connectors are big. If I wanted Midi Out/In/Thru capability with the Fluxamasyth shield, I could probably use something like this Midi breakout shield: http://www.sparkfun.com/products/9598. As long as the Fluxamasyth shield had those long pinned headers (or not have the heade...

I have the Fluxamasynth Rev. 1 and love it. I would also be interested in a Fluxamasynth Arduino shield. You mentioned that you'd like suggestions for added features for the shield. I would like to see the shield with midi jacks. Midi In - Would allow Arduino to input Midi, transform it, and play it...

It sounds like you may want something like this: http://www.analog.com/en/digital-to-ana ... oduct.html
There is example code for Arduino at http://www.arduino.cc/en/Tutorial/SPIDigitalPot