Search found 6 matches

by beverageexpert
Fri Aug 21, 2009 12:59 am
Forum: RBBB
Topic: possible bootloader problem?
Replies: 8
Views: 14045

Re: possible bootloader problem?

Well I wasnt able to connect the bub. i was able to hook it up through my duemilanove but to no avail. My chip is still giving me issues. Good news is all my components are still working. my duemilanove bub etc. I wired the male pins on my bub and hooked it up all proper but the software wouldnt con...
by beverageexpert
Thu Aug 20, 2009 1:29 pm
Forum: RBBB
Topic: possible bootloader problem?
Replies: 8
Views: 14045

Re: possible bootloader problem?

Seems the pins are set up this way x3 pin 1 = cts x3 pin 2 = dsr x3 pin 3 = dcd x3 pin 4 = ri so if I solder pins to the bub in this configuration and hook it up to my duemilanove icsp pins I should be able to do this right? I don't want to destroy my bub. I am going to research it a bit more before...
by beverageexpert
Thu Aug 20, 2009 12:19 am
Forum: RBBB
Topic: possible bootloader problem?
Replies: 8
Views: 14045

Re: possible bootloader problem?

I really appreciate your quick response. I was thinking of getting a programmer anyway so I was hesitant of sending my chip back. I don't think that will be happening anytime soon though as adafruit has the one I want back ordered. So I came across the bitbang technique http://www.geocities.jp/ardui...
by beverageexpert
Mon Aug 17, 2009 7:10 pm
Forum: RBBB
Topic: possible bootloader problem?
Replies: 8
Views: 14045

possible bootloader problem?

so I received another rbbb and was trying to program it without the right angle header pins soldered. One of the rbbbs worked fine this way and I got the led to blink. On the other one I had problems trying to get it to load the program. I thought it was just the connection as it was real difficult ...
by beverageexpert
Thu Aug 06, 2009 9:40 pm
Forum: RBBB
Topic: temporary way to connect usb bub
Replies: 2
Views: 6460

Re: temporary way to connect usb bub

thanks for the reply so if I solder the male pins to the bub and just slide the rbbb over the pins that will be a good enough of a connection? I thought I would need something to lock it down or something hence the female pins. Well Ill give it a try with my next one as I have soldered pins on the c...
by beverageexpert
Thu Aug 06, 2009 12:20 am
Forum: RBBB
Topic: temporary way to connect usb bub
Replies: 2
Views: 6460

temporary way to connect usb bub

Hello this is my first post so bear with the noob. I have purchased a few rbbb's and I am loving them. I plan on buying one with each paycheck till I have enough if that is possible. How do I connect the rbbb with the usb bub without soldering the 5 right angle header pins on the rbbb? I am using it...